Відео

Do know or where can I find the front steering turn buckles

Nice, 8turn should rock. Tem GPS seem pretty good. Runs great bud. 27 solid on stock brushed.. thanks for sharing. Let the fun begin ..

Hey that is good for brushed 👍 Great vid and good luck in the contest 😁

nice! good job luke, good start.. my first official will be this weekend... good luck!

I would maybe do a smaller battery to reduce a little weight.. but as i understand it the smaller batteries also give a slight higher output?

Nice shake down and a respectable speed especially with the stock 16 tooth pinion.

Great first iteration.

Hey Luke! that is a great looking chassis, and pretty impressive speed with the brushed setup too! nice.

Great passes, Luke. 28 mph is a solid baseline. Add some gearing and a little luck, and you'll be in the 40's before you know it!

Nice first run with it! I saw the scrapes on the roof, that kind of stinks!

Nice 1st run, love the body 😊✌🤝

Love the car! Good luck! See ya on the board!🤜🤛

By chance is that 8T a 5-slot vs a regular 3-Slot? If so it would be equal to around a 21T 3-slot

Great start👍

definitely go brushless.. that thing will hit 60 easily and much faster with enough space

Awesome build! Welcome to the challenge! Good luck! Subscribed!

This was my first rc truck in the 80s then I got a pumpkin in 87 I've still got it had new g box casing and a new shell but the rest is as 87

What bearings did you use?

That needs a brushless system

Hey great build. Looks cool as Herbie 😁 I guessed 12mph! Good luck in the contest 👍👍

A lovely Herbie (one of the most iconic movie car of all time) 🤩 Good luck with the challenge (please don't trash this body 😢). I see in the background a beautiful box of the Tamiya Daytona Thunder, you're lucky 😊

welcome to the madness! this is my first time entering it as well .. should be fun! good luck

Go little Herbie!

nikko made crappy toys but the novelty of them was unmatched

I also found your review for the sport tuned on Amazon! I found your channel, Great Videos btw!

Nice, I like the Herbie version. Best wishes and have fun. Please check the lengthof the shocks. I bought (probably) the same at the jungle river. The describtion was wrong. Althought they should fit for these chassis and the TTs. Had tosent them back, they're too long. Now I use the super mini CVAs (54753)

Nice overview and first run.

Very nice job. All it needs is a hot red head driver!! Welcome to the circus!!

I really need to dig out mine and get it spec’d up for the speed challenge

Great video 😉 Beautiful tamita beetle ❤️‍🔥💯💪

I’m a huge fan of the MF01X, with a few upgrades it’s a great chassis and it drives beautifully on road and can even handle a little bit of mild off road.

Man Tamiya needs to work on their presentations just a little I mean what an absolute disaster compared to the old days. Looks like they literally just threw it in a box I’m surprised they still have box art. Come on Tamiya this might be a kids first kit on Christmas and that’s what he gets. I only care because I’m addicted to them.

Awesome buddy

Great body shell! Looks spot on. Good luck in the speed challenge 👍🏻

Great work Luke. Hopefully you don’t mind smashing up that beautiful body shell as you start getting things up to speed brother 😁

Awesome! Looks like everyone’s getting in on Fil’s challenge. Lovely Herbie build and run!👍😁

Hey Luke, welcome to the 2024 Poor Boys RC Speed Run Challenge! That's a rad looking Herbie you've got there! Thanks for the kind email and I'm really looking forward to seeing your speed runs. Have fun! 💨💨💨

Car looks great and Great Luck!

I love the Herbie theme! Best of luck in the challenge as well. I chose to run a donor body as I know mine is going to end up with some road rash and possibly needing some parts replaced so I am keeping the beetle body for after this is all done! LOL! It should be fun and with all the competition i have zero hopes of winning but I am gonna feed it the beans regardless!

YES!!! Man, I've been eye balling this kit and the street version on the M-06 chassis to do this exact build. When you said that you were wanting it to be Hollywood inspired, I thought "that better be Herbie under that cloth!" lol. That's a childhood (and still is) favorite movie series of mine. As always, beautiful build, Luke! Can't wait to see the updates with the upgraded parts, man! Good luck with the competition!

My first rc childhood car. I was in Pakistan when my dad bought me this car and when i came to USA i brought it with me. I still have it. I will restore it again. Thanks for sharing the video

범퍼를 잡아주는 금속 부품이 너무 약했던 기억이 나네요

Yeah, I had that little guy. Remember it like yesterday. Took it at full speed right to the toe and blew my toenail off! She was quick!!

One of the kyoshos i dont have but i do have a mint big boss rtr and a 1/8 dmve nice video

How bout add a brushless system and a upgrade powered system

Hi Luke i saw your videos on the Richmans Toys Batmobile, back in 1990-91 i swear i saw that Cox rc produced a Batmobile, this thing was huge, almost 3 feet long, the box was different to the Richmans package too, do you have any old catalogues from that period to confirm this? Or am i just remembering differently 🤔

That is what I have. Moving everything over to Graphite frame and aluminum parts That I purchased years ago. Getting back into it. Current Truck has a busted shock Mount. I want aluminum. Cool Video.

That's a nice-looking Mustang! You know, I never really focused on the non-hobby grade stuff except for the Nikko Rhino. Watching your videos has introduced me to an expanded world of rc that was not on my radar. Thank you for that Luke! Also, if you don't mind me asking, is there a way that I can contact you? I'm doing some vintage rc research and could really benefit from your expertise. Thanks again!

I’ve got a factory built and painted one from 1991 in my collection only used it 2 or 3 times, absolutely love it! Keep up the great work on your channel mate!

Nice work!